LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> ADAS Driving Ecu Diagnosis >> DTC C1831-86: CAN Signal Error - Navigation >> Wiring Inspection >> Circuit Inspection >> Module Inspection

Module Inspection

Inspection Item Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
Power inspection (AVN ↔ Chassis ground)
  1. Disconnect the AVN connector.
  2. Ignition "ON".
AVN connector 10, 11 (hot at all power) Chassis ground - B+
AVN connector 22, 33 (ACC/ON, ON/START Input) Chassis ground - B+
Open in circuit inspection (AVN ↔ Chassis ground)
  1. Ignition "OFF".
  2. Disconnect the AVN connector.
AVN connector 1, 12, 13 (ground) Chassis ground - Approx. below 1Ω

Good 

No Good