Open In CAN Communication Line Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Open in circuit inspection (ADAS_DRV ↔ MDPS) |
|
ADAS_DRV connector | 10 (C-CAN high) | MDPS connector | 7 (C-CAN high) | Approx. below 1Ω |
| ADAS_DRV connector | 4 (C-CAN low) | MDPS connector | 8 (C-CAN low) | Approx. below 1Ω | ||
Good
- Go to "C-CAN COMMUNICATION LINE INSPECTION " procedure.
No Good
- Repair open or short in circuit and then Go to "VERIFICATION OF REPAIR " procedure.