Module Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Power inspection (TCM ↔ Chassis ground) |
|
TCM connector | 17, 67, 68 (power) | Chassis ground | - | B+ |
| Open in circuit inspection (TCM ↔ Chassis ground) |
|
TCM connector | 71, 73, 74 (ground) | Chassis ground | - | Approx. below 1Ω |
Good
- Go to "P-CAN INSPECTION " procedure.
No Good
- Repair as necessary and Go to "VERIFICATION OF REPAIR " procedure.