Circuit Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Short in circuit inspection (Head lamp LH (low) ↔ Chassis ground) |
|
Head lamp LH (low) connector | 1 (power) | Chassis ground | - | ∞ (infinity)Ω |
Good
- If no problems were found with the circuits or connectors, replace the LED or lamp module and Go to "VERIFICATION OF REPAIR " procedure.
- If the problem still occurs, replace the ICU and Go to "VERIFICATION OF REPAIR " procedure.
No Good
- Repair open or short in circuit and then Go to "VERIFICATION OF REPAIR " procedure.