Module Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Power inspection (DDM ↔ Chassis ground) |
|
DDM connector | 8, 16 (power) | Chassis ground | - | B+ |
| Open in circuit inspection (DDM ↔ Chassis ground) |
|
DDM connector | 9 (ground) | Chassis ground | - | Approx. below 1Ω |
Good
- Go to "B-CAN INSPECTION " procedure.
No Good
- Repair as necessary and Go to "VERIFICATION OF REPAIR " procedure.