LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Cluster Module Diagnosis >> DTC B2800-00: MM CAN Bus Off Error >> Wiring Inspection >> Circuit Inspection >> Module Inspection

Module Inspection

Inspection Item Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
Power inspection (AVN ↔ Chassis ground)
  1. Disconnect the AVNT connector.
  2. Ignition "ON".
 AVNT connector 10, 11, 22, 33 (power) Chassis ground - B+
Open in circuit inspection (AVNT ↔ Chassis ground)
  1. Ignition "OFF".
  2. Disconnect the AVNT connector.
 AVNT connector 1, 12, 13 (ground) Chassis ground - Approx. below 1Ω
Power inspection (ICU ↔ Chassis ground)
  1. Disconnect the ICU connector.
  2. Ignition "ON".
 ICU connector 1, 2, 3, 4, 17, 26, 31 (power) Chassis ground - B+
Open in circuit inspection (ICU ↔ Chassis ground)
  1. Ignition "OFF".
  2. Disconnect the ICU connector.
 ICU connector 16, 24 (ground) Chassis ground - Approx. below 1Ω

Good 

No Good 

scientia non olet · About LEMON Manuals