LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> BCM Diagnosis >> DTC B1810-00: UIP/ROA Sensor Error >> Wiring Inspection >> Circuit Inspection

Circuit Inspection

G15723630Courtesy of KIA MOTORS AMERICA, INC.
Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Engine "ON".
  2. Gear "D".
ROA connector 5 (LIN) Chassis ground - Fig.1 below
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
  3. Ignition "ON".
1 (Memory power) 6 (ignition1) Chassis ground - B+
4 (ground) 4 (ground) Chassis ground - Approx. below 1Ω
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
3 (LIN) 5 (LIN) IBU connector 7 (rear seat reminder) Approx. below 1Ω
G15723631Courtesy of KIA MOTORS AMERICA, INC.

Good 

No Good