DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Check the CAN communication	Poor connection connector CAN high and low line coincidentally short to battery CAN high and low line coincidentally short to ground Faulty the IBU
Enable Conditions	Battery voltage is between 9V and 16V
Threshold Value	B-CAN high and low circuit simultaneous 0V detection (short to ground) B-CAN high and low circuit simultaneous battery voltage detection (short to battery)
Detecting Time	2s
DTC Erasing	DTC erasing to using KDS equipment after troubleshooting Ignition "ON" and "OFF" without current fault 30 times continuous DTC auto erase (30 times counter reset during current fault during ignition "ON" and "OFF")