Center Air Vent
- Disconnect the battery negative (-) terminal and the service interlock connector.
- Remove the upper battery cover (A) after rotating valve in the direction of the arrow.
- Disconnect the auxiliary 12 V negative (-) battery terminal (A) after loosening the nut.
Tightening torque :
7.8 - 9.8 N.m (0.8 - 1.0 kgf.m, 5.8 - 7.2 lb.ft)
- Remove the engine room junction box cover (A).
- Disconnect the service interlock connector (A).WARNING: Wait more than 3 minutes for capacitor in the inverter to be discharged completely after disconnecting the high voltage service interlock connector.NOTE: The high voltage service interlock connector cannot be completely removed.
- Remove the upper battery cover (A) after rotating valve in the direction of the arrow.
- Remove the center air vent (A).
Information
Clip position: Dotted circles
- Disconnect the connector (A).