Inspection Procedure

Check for software version on the RL_C_RDR and RR_C_RDR label. (Fig.1 below)

Courtesy of KIA MOTORS AMERICA, INC.

Good
- Carefully re-do troubleshooting steps.
- If no problems were found with the circuits or connectors, replace the RL_C_RDR or RR_C_RDR and go to "VERIFICATION OF REPAIR " procedure.
- In case of RL_C_RDR or RR_C_RDR is replaced, "Radar Calibration" must be performed.
No Good
- Repair as necessary and then go to "VERIFICATION OF REPAIR " procedure.