LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> EV6 Light >> Repair and Diagnosis >> Steering >> Electronic Steering >> MOTOR DRIVEN POWER STEERING (MDPS) (2WD / 70kW+160kW AWD) >> Steering Gear Box >> Removal And Installation - (4WD) >> Installation

Removal And Installation - (4WD): Installation

  1. Install in the reverse order of removal.
    NOTE: When installing, install the bolts on the bushing side first and install the remaining nuts.
  2. Perform the EPS type recognition and Steering Angle Sensor (SAS) calibration.

    (Refer to Motor Power Steering System -  "ADJUSTMENT ")

  3. Check the alignment.

    (Refer to Alignment - " ALIGNMENT (4WD) ADJUSTMENT  ") 

scientia non olet · About LEMON Manuals