Removal And Installation: Removal
WARNING:
- When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
- When working on the high voltage system or related components, be sure to observe and be aware of the HIGH VOLTAGE SYSTEM GENERAL SAFETY INFORMATION AND CAUTION . If not, it may cause serious accidents due to electric shock or short circuit.
- When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and HIGH VOLTAGE SHUT-OFF PROCEDURES .
- Remove the crash pad air vent duct [LH].
(Refer to Body - " CRASH PAD AIR VENT ")
- Remove the crash pad center garnish.
(Refer to Body - " CRASH PAD GARNISH ")
- Remove the cluster blanking cover (A).
- Remove the cluster (A) after removing the screws.
- Disconnect the cluster connectors (A).