Crash Pad Center Garnish [RH]
- Disconnect the battery negative (-) terminal and the service interlock connector.
(Refer to Battery Control System - " AUXILIARY 12 V BATTERY 2WD ")
(Refer to Battery Control System - " AUXILIARY 12 V BATTERY 4WD ")
- Remove the crash pad side cover.
(Refer to Crash Pad - "CRASH PAD SIDE COVER ")
- Remove the hazard switch bezel (A).
- Remove the crash pad center garnish [RH] (A) by using the remover.
- Disconnect the mood lamp connector (A).