Circuit Inspection
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
HUD connector | 7 (C-CAN high) | Chassis ground | - | Fig. 1 |
| HUD connector | 8 (C-CAN low) | Chassis ground | - | ||
|
CLU (component side) | 32 (C-CAN high) | CLU (component side) | 33 (C-CAN low) | Approx. 120Ω |
| ICU (component side) | 9 (C-CAN high) | ICU Component | 10 (C-CAN low) | Approx. 120Ω | |
Good
- Go to "COMPONENT INSPECTION " procedure.
No Good
- Check for a short circuit between the wiring and the chassis ground.
- Perform repair or replacement as necessary and perform the "VERIFICATION OF REPAIR " procedure.