DTC Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.

Item	Detecting Condition	Possible Cause
DTC Strategy	Voltage monitoring	Poor connector connection Faulty input speed sensor circuit Faulty input speed sensor
Enable Conditions	Ignition "ON" voltage is more than 10V Engine speed higher than 400 RPM Lever position in "D" or "Sports" (forward gear)
Threshold Value	Input speed is 0 RPM
Fail Safe	5th Gear Hold, Learning is prohibited, Learning is prohibited After fault confirm: Manual gear shift from 2nd to 5th is allowed Gear is fixed at 5th gear at 'D"
Detecting Time	4s
MIL ON Condition	2 driving cycle