Circuit Inspection
WARNING: This page is about a different variant/trim than selected.
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
OCV - Ex connector | 1 (power) | Chassis ground | - | ∞(infinity)Ω |
| OCV - Ex connector | 2 (control) | Chassis ground | - | Approx. below 1Ω | |
|
OCV - Ex connector | 1 (power) | Chassis ground | - | B+ |
| OCV - Ex connector | 2 (control) | Chassis ground | - | Approx. 2.5V | |
Good
- Go to "COMPONENT INSPECTION " procedure.
No Good
- Repair or replace as necessary and then, go to "VERIFICATION OF REPAIR " procedure.