DTC Information: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- Deviation check between the actual CAM position and the CAM set-point position (steady deviation) - exhaust
|
- Poor connector connection
- Faulty OCV
- Faulty cam phaser
- Faulty exhaust CVVT assembly
|
| Enable Conditions |
- Camshaft set-point movement more than 10 degree CRK
- Engine speed at between 576 and 4992 RPM
- Engine oil temperature at between 68°F (20°C) and 248°F (120°C)
- Battery voltage at between 11V and 16V
|
| Threshold Value |
- Deviation between actual valve and target valve is more than 5.25 degree
|
| Diagnostic Time |
|
| MIL ON Condition |
|