LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento X-Line EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System - 2.5L (VIN C) (Except HEV)) >> Oil Pressure And Oil Temperature Sensor (OPTS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install in the reverse order of removal.
    NOTE:
    • The existing OTPS should be replaced with a new one.
    • Install the OTPS with the specified torque
    • If OTPS is dropped, it may cause internal damage. Do not use it.
scientia non olet · About LEMON Manuals