LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento X-Line EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System - 2.5L (VIN C) (Except HEV)) >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install in the reverse order of removal.
    NOTE:
    • Install the HO2S with the specified torque.
    • If HO2S is dropped, it may cause internal damage. Do not use it.
    • Do not use a cleaner, spray or grease on the sensing element and connector because they could cause a malfunction of sensor.
    • Sensor and its wiring may be damaged in case of contacting with the exhaust system (Exhaust Manifold, Catalytic Converter, and so on).
scientia non olet · About LEMON Manuals