LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento X-Line EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System - 2.5L (VIN C) (Except HEV)) >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Install the CKPS with the specified torque.
  • If CKPS is dropped, it may cause internal damage. Do not use it.
  • Install the CKPS after applying the engine oil to the O-ring.
  • Be careful to damage the sensor, when it is installed.
  1. Install in the reverse order of removal.