LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento X-Line EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Fuel Delivery System - 2.5L (VIN C) (Except HEV)) >> Rail Pressure Sensor (RPS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Install the RPS with the specified torque.
  • If RPS is dropped, it may cause internal damage. Do not use it.
  1. Install in the reverse order of removal.
  2. Check for leakage the fuel after installation.
  3. Reset the ECM adaptive values after replacing the RPS.
G13661269Courtesy of KIA MOTORS AMERICA, INC.
G13661270Courtesy of KIA MOTORS AMERICA, INC.