LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento X-Line EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine And Transaxle Assembly (R & I) - 2.5L (VIN C) (Except HEV)) >> Engine Room Under Cover >> Repair Procedures >> Removal and Installation

Removal and Installation

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine room under cover (A).

    Tightening torque: 

    7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb.ft)

    G13660735Courtesy of KIA MOTORS AMERICA, INC.
  2. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals