LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento X-Line EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine And Transaxle Assembly (R & I) - 2.5L (VIN C) (Except HEV)) >> Engine Cover >> Repair Procedures >> Removal and Installation

Removal and Installation

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine cover (A).
    G13660734Courtesy of KIA MOTORS AMERICA, INC.
    NOTE:
    • Remove the engine cover on room temperature.
    • Do not disengage both front and rear mounting point at the same time.
  2. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals