Circuit Inspection

WARNING: This page is about a different variant/trim than selected.

G13681955

Courtesy of KIA MOTORS AMERICA, INC.

G13681956

Courtesy of KIA MOTORS AMERICA, INC.

Inspection Condition	(+) Probe		(-) Probe		Reference
Inspection Condition	Connector	Terminal	Connector	Terminal	Reference
Ignition "OFF". Disconnect the electrical connector(s) from the concerned component. Ignition "ON".	MPI injector #3 connector	1 (power)	Chassis ground	-	B+
	MPI injector #3 connector	2 (control)	Chassis ground	-	Approx. 2.5V
Ignition "OFF". Disconnect the electrical connector(s) from the concerned component.	MPI injector #3 connector	1 (power)	Chassis ground	-	∞ (infinity)Ω
	MPI injector #3 connector	2 (control)	Chassis ground	-	∞ (infinity)Ω
	MPI injector #3 connector	1 (power)	MPI injector #3 connector	2 (control)	∞ (infinity)Ω

Good

Go to "COMPONENT INSPECTION " procedure.

No Good

Repair or replace as necessary and then, go to "VERIFICATION OF REPAIR " procedure.