Circuit Inspection
WARNING: This page is about a different variant/trim than selected.
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
GDI injector #4 connector | 2 (high) | Chassis ground | - | Approx. 0.5V |
| GDI injector #4 connector | 1 (low) | Chassis ground | - | Approx. 0.5V | |
|
GDI injector #4 connector | 2 (high) | Chassis ground | - | ∞ (infinity)Ω |
| GDI injector #4 connector | 1 (low) | Chassis ground | - | ∞ (infinity)Ω | |
| GDI injector #4 connector | 2 (high) | GDI injector #4 connector | 1 (low) | ∞ (infinity)Ω | |
Good
- Go to "COMPONENT INSPECTION " procedure.
No Good
- Repair or replace as necessary and then, go to "VERIFICATION OF REPAIR " procedure.