Circuit Inspection

WARNING: This page is about a different variant/trim than selected.

G13680342

Courtesy of KIA MOTORS AMERICA, INC.

Inspection Condition	(+) Probe		(-) Probe		Specification
Inspection Condition	Connector	Terminal	Connector	Terminal	Specification
Ignition "OFF". Disconnect the electrical connector(s) from the concerned component. Ignition "ON".	Fuel pump relay connector	1 (relay power)	Chassis ground	-	B+
	Fuel pump relay connector	3 (coil power)	Chassis ground	-	B+
	Fuel pump relay connector	5 (coil control)	Chassis ground	-	Approx. 2.8V
	Fuel pump relay connector	2 (fuel pump relay "ON" input)	Chassis ground	-	Approx. 0V

Good

Go to "COMPONENT INSPECTION " procedure.

No Good

Repair or replace as necessary and then, go to "VERIFICATION OF REPAIR " procedure.