LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento X-Line EX >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake And Exhaust System - 2.5T (VIN F) (Except HEV) >> Muffler And Catalytic Converter >> Repair Procedures >> Removal and Installation >> Center muffler assembly

Center muffler assembly

  1. Remove the center muffler assembly.
    1. Remove the center muffler assembly hanger (A).
    2. Remove the center muffler assembly (B).

      Tightening torque: 

      39.2 - 58.8 N.m (4.0 - 6.0 kgf.m, 28.9 - 43.4 lb.ft)

      G13664415Courtesy of KIA MOTORS AMERICA, INC.
  2. Install in the reverse order of removal.
    NOTE: When installing, replace with new gaskets.
scientia non olet · About LEMON Manuals