Circuit Inspection
| Circuit Inspection (W/O EPB) | |||||
|---|---|---|---|---|---|
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
| Connector | Terminal | Connector | Terminal | ||
|
HECU connector | 1, 25 (Memory power) | Chassis ground | - | B+ |
| HECU connector | 13, 38 (ground) | Chassis ground | - | Approx. below 1Ω | |
|
HECU connector | 32 (ON/START Input) | Chassis ground | - | B+ |
| Circuit Inspection (With EPB) | |||||
|---|---|---|---|---|---|
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
| Connector | Terminal | Connector | Terminal | ||
|
HECU connector | 1, 30 (Memory power) | Chassis ground | - | B+ |
| HECU connector | 14, 46 (ground) | Chassis ground | - | Approx. below 1Ω | |
|
HECU connector | 37 (ON/START Input) | Chassis ground | - | B+ |
Good
- Go to "COMPONENT INSPECTION " procedure.
No Good
- Repair open or short in circuit and then go to "VERIFICATION OF REPAIR " procedure.