LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Testing and Diagnosis >> HEV Battery System Diagnosis (PHEV) (2 Of 2) >> DTC P1BBD-00: BMS Overcharge Protection Device Circuit Fault >> Wiring Inspection >> Basic Inspection >> Inspection Procedure

Inspection Procedure

  1. Check fuses and relays.
  2. Check auxiliary battery terminals and charge status.
  3. Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.

    Good 

    • Fault might be intermittent and caused either by poor contact in connectors or wiring harness, or it has been repaired and control module memory is not cleared yet. Thoroughly check terminal of battery, all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage. Repair or replace as necessary and then Go to "Verification Of Repair " procedure.

    No Good 

scientia non olet · About LEMON Manuals