LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Audio/AVN System (PHEV)) >> Antenna >> Repair Procedures >> Removal >> Roof Antenna

Roof Antenna

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.

    (Refer to Engine Electrical System - "AUXILIARY BATTERY ")

  2. Remove the roof trim assembly.

    (Refer to Body - "ROOF TRIM ASSEMBLY ")

  3. Remove the roof antenna (C) after removing the nut (B) and disconnecting the roof antenna connector (A).

    Tightening torque: 

    7.8 - 14.7 N.m (0.8 - 1.5 kgf.m, 5.8 - 10.8 lb.ft)

G14942419Courtesy of KIA MOTORS AMERICA, INC.
G14942420Courtesy of KIA MOTORS AMERICA, INC.