Operating Test
WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
This test should be performed in the PTC ON conditions.
- Engine "Running".
- Check the current on wiring with a clamp multi tester.
| Pattern |
Current (A) |
| PTC 1 ON |
0.1 ~ 33 |
| PTC 2 ON |
0.1 ~ 33 |
| Total |
0.1 ~ 100 |
- If the current is not within specification, inspect related wiring.