LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Crash Pad (PHEV)) >> Glove Box >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
  • When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
  • When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
  1. Open the glove box (A)
    G14940147Courtesy of KIA MOTORS AMERICA, INC.
  2. Separate the air damper (A) from the glove box.
    G14940148Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the glove box (A) by pushing both sides inward.
    G14940149Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals