LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Crash Pad (PHEV)) >> Crash Pad Garnish >> Repair Procedures >> Removal >> Crash Pad Passenger's Garnish

Crash Pad Passenger's Garnish

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crash pad side cover [RH]

    (Refer to Crash Pad - "CRASH PAD SIDE COVER ")

  2. Remove the AVN and audio head unit.

    (Refer to ("A/V NAVIGATION ")

    (Refer to ("REMOVAL Audio")

  3. Remove the crash pad mounting cover [RH] (A) using a flat-head screwdriver or remover.
    G14940144Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the crash pad passenger's (A) after removing the mounting screw.
    G14940145Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the crash pad garnish connector (A).
    G14940146Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals