LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Exhaust Emission Control System (PHEV)) >> EGR Temperature Sensor >> Repair Procedures >> Inspection >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Disconnect the EGR temperature sensor connector.
  3. Measure resistance between the EGR temperature sensor terminals 1 and 2.
  4. Check that the resistance is within the specification.
Temperature Resistance (kΩ)
°C °F
-40 -40 120.147 - 140.624
-30 -22 82.236 - 95.518
-20 -4 57.887 - 66.761
-10 14 41.794 - 47.885
0 32 30.875 - 35.159
10 50 23.286 - 26.366
20 68 17.893 - 20.152
30 86 13.983 - 15.670
40 104 11.094 - 12.375
50 122 8.925 - 9.911
60 140 7.269 - 8.039
70 158 5.988 - 6.596
80 176 4.983 - 5.469
90 194 4.186 - 4.578
100 212 3.547 - 3.866
110 230 3.029 - 3.291
120 248 2.606 - 2.822
130 266 2.257 - 2.438
140 284 1.967 - 2.119
150 302 1.725 - 1.853
160 320 1.522 - 1.631
170 338 1.349 - 1.443
180 356 1.203 - 1.283
190 374 1.078 - 1.147
200 392 0.970 - 1.030
210 410 0.8752 - 0.9313
220 428 0.7931 - 0.8456
230 446 0.7216 - 0.7708
240 464 0.6590 - 0.7052
250 482 0.6038 - 0.6472
260 500 0.5549 - 0.5957
270 518 0.5111 - 0.5496
280 536 0.4716 - 0.5080
290 554 0.4356 - 0.4699
300 572 0.4025 - 0.4349