Catalytic Converter And Center Muffler Assembly

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.

Remove the catalytic converter & center muffler assembly.
1. Remove the catalytic converter & center muffler assembly hanger (A).
2. Remove the catalytic converter & center muffler assembly (B).
Tightening torque:

40.2 - 59.8 N.m (4.1 - 6.1 kgf.m, 29.7 - 44.1 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.

NOTE: When installing, replace with new gaskets.
Install in the reverse order of removal.