LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Engine And Transaxle Assembly (R & I) (PHEV)) >> Engine Cover >> Repair Procedures >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover (A).
    G14937094Courtesy of KIA MOTORS AMERICA, INC.
    NOTE:
    • Remove the engine cover on room temperature.
    • Do not disengage both front and rear mounting point at the same time.
  2. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals