LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Hybrid Cooling System (PHEV)) >> Reservoir >> Repair Procedures >> Inspection >> Reservoir Cap Testing

Reservoir Cap Testing

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the inverter reservoir cap, and then connect it to pressure tester after installing using SST (0K253 - P4100).
    G14959901Courtesy of KIA MOTORS AMERICA, INC.
  2. Apply a pressure tester to the reservoir and apply a pressure of 93.16 - 122.58 kPa (0.95 - 1.25 kgf/cm2 , 13.51 - 17.78 psi).
  3. Inspect for a drop in pressure.
  4. If the pressure drops, replace the cap.
scientia non olet · About LEMON Manuals