LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Hybrid Cooling System (PHEV)) >> Radiator >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
    NOTE: Be careful not to damage other hose when tightening the clamp.
  2. Refill the hybrid motor cooling system with coolant and then perform the air bleeding using the KDS.

    (Refer to Hybrid Motor Cooling System - "COOLANT ")

  3. Confirm the coolant leak or fluid leak from the hose connections part in state of engine start.
scientia non olet · About LEMON Manuals