LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Hybrid Cooling System (PHEV)) >> Electric Water Pump (EWP) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
    NOTE:
    • Be careful not to damage other hose when tightening the clamp.
    • Refill the hybrid motor cooling system with coolant and then perform the air bleeding using the KDS.

      (Refer to Hybrid Motor Cooling System - "COOLANT ")

    • Confirm the coolant leak or fluid leak from the hose connections part in state of engine start.
scientia non olet · About LEMON Manuals