LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Abs/Esp Diagnosis (PHEV) (1 Of 4)) >> DTC C1208-02: Wheel Speed Sensor Rear-LH Invalid/No Signal >> Wiring Inspection >> Circuit Inspection

Circuit Inspection

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
G14969186Courtesy of KIA MOTORS AMERICA, INC.
G00671887Courtesy of KIA MOTORS AMERICA, INC.
Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. EV "ON".
 WSS rear-LH connector 2 (power) - 4WD 1 (power) - 2WD WSS rear-LH connector 1 (signal) - 4WD 2 (signal) -2WD Fig.1
  1. Disconnect the electrical connector(s) from the concerned component.
  2. Ignition "ON".
 WSS rear-LH connector 2 (power) - 4WD 1 (power) - 2WD Chassis ground - Approx. 10V
WSS rear-LH connector 1 (signal) - 4WD 2 (signal) -2WD Chassis ground - Approx. 3.9 to 8.8V
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
 WSS rear-LH connector 1 (signal) - 4WD 2 (signal) -2WD IEB module connector 42 (signal) Approx. below 1Ω
WSS rear-LH connector 2 (power) - 4WD 1 (power) - 2WD IEB module connector 33 (power) Approx. below 1Ω
G14969197Courtesy of KIA MOTORS AMERICA, INC.
G00671888Courtesy of KIA MOTORS AMERICA, INC.

Good 

No Good 

scientia non olet · About LEMON Manuals