DTC Information: DTC Detecting Condition
WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
|
- Poor connector connection
- Faulty the SBW actuator
- Faulty the position sensor
- Faulty the SCU
|
| Enable Condition |
- Auxiliary battery voltage is greater than 10V
- Ignition "ON" (diagnose even when engine is "ON")
- SBW actuator position sensor normal
- SBW motor system normal
|
| Threshold Value |
- Target duty is greater than 0 but the change in motor position is reduced or the target duty is less than 0%, but the change in motor position increases
- When the position sensor standards motor system is operated in reverse direction. - greater than 10%
|
| Fail Safe |
- Before threshold value: maintain previous signal
- After threshold value
- Maintain current gear, Display of SBW system warning statements at D/N/R signal
- "P" range: EPB, parking warning statement set
|
| MIL ON Condition |
|