DTC Information: DTC Detecting Condition
WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
|
- Overheat
- Faulty the center mood lamp
- Over 85°C (185°F)
- Short circuit
- Damaged slave controller ↔ LED wire
- Faulty slave controller ↔ slave controller connector (bending connector pin)
- Open circuit
- Deterioration slave controller ↔ LED wire
- Separated slave controller ↔ slave controller connector
|
| Enable Condition |
- Ignition "ON"
- Auxiliary battery voltage (9 to 16V)
- Mood lamp "ON"
|
| Threshold Value |
- Overheat slave controller
- Open or short circuit to LED circuit of slave controller
|
| Diagnosis Time |
- Mood lamp "ON" and wait 3s
- ex) Open the door after engine "ON"
|
| Symptom |
|
| Fail Safe |
- Turn mood lamp LED "OFF" when monitor DTC
|
| Erasing Condition |
- (Fail safe erasing condition) - Erase the DTC and re-setting (color and light)
|