DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.

Item	Detecting Condition	Possible Cause
DTC Strategy	Check output signal	Disconnect slave controller connectors Short circuit of the LIN communication wires Body or other wires
Enable Condition	Ignition "ON" Auxiliary battery voltage (9 to 16V) Mood lamp "ON"
Threshold Value	Driver mood lamp LIN communication error detected
Diagnosis Time	Mood lamp "ON" and wait 3s ex) Open the door after engine "ON"
Symptom	Mood lamp "OFF"
Fail Safe	Turn mood lamp LED "OFF" when monitor DTC
Erasing Condition	(Fail safe erasing condition) - Erase the DTC and re-setting (color and light)