LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (HEV Motor Control System Diagnosis (PHEV) (2 Of 2)) >> DTC P0C05-00: Drive Motor 'A' Phase U-V-W Circuit/Open >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
DTC Strategy
  • Check the current
  • Poor connection in drive motor 3 phase cable connector
  • Open in drive motor 3 phase cable
  • Open in drive motor's inside wire
Enable Condition Case 1
  • Ignition "ON"
  • Ignition "ON" & supply DQ high frequency current (30A, 50Hz) for 40 ms
  • Auxiliary battery voltage (9 to 16V)
  • No DTC P0BE600, P0BE700, P0BE800, P0BEE00, P0BEF00, P0BF000, P0BFF00
Case 2
  • Ignition "ON"
  • Auxiliary battery voltage (9 to 16V)
  • Drive motor speed (200 to 6, 500 RPM)
  • Drive motor target current is over 50A
  • No DTC P0BE600, P0BE700, P0BE800, P0BEE00, P0BEF00, P0BF000, P0BFF00
Threshold Value Case 1
  • Drive motor (+) phase current: Not detected over 12.5A
  • Drive motor (-) phase current: Not detected below -12.5A
Case 2
  • The current of 1 phase of drive motor 3 phase cable is below 10A at the enable conditions
Diagnosis Time Case 1
  • 40 ms
Case 2
  • 30 ms
MIL
  • Immediately
Service Lamp
  • ON