DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitoring CAN messages	Specification information input error
Enable Condition	Ignition "ON" (ignition "ON" signal received more than 2s) Battery voltage is between 9V and 16V CAN communication line in normal condition
Threshold Value	AVN specification information error or bad vehicle assembly
Diagnosis Time	12s
Symptom	SCC normal work SCC warning lamp turns off FCA normal work FCA warning lamp turns off NSCC disabled NSCC USM disable
Service Lamp ON Condition	-
Service Lamp OFF Condition	In case of satisfying release condition
Clear Condition	Normal AVN CAN message received