DTC Information: DTC Detecting Condition
WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- SENT protocol check for HFM
|
- Poor connector connection
- Faulty HFM
|
| Enable Conditions |
|
| Threshold value |
- Message timeout is greater than 2 frame
- Channel status is not synchronized
- Frequency range is less than 56 clock ticks -25%
- Frequency range is greater than 56 clock ticks +25%
- Successive calibration pulses difference is greater than 1.5625%
- Successive calibration pulses difference is less than -1.5625%
- Number of nibbles is not expected number
- Nibble data value is less than 12 ticks
- Nibble data value is greater than 27 ticks
- Received Cycle Redundancy Check (CRC) is not the same as calculated CRC
- Period of start bit of serial data is not the same as 16 frame
|
| Diagnosis Time |
|
| MIL ON Condition |
|