Component Inspection
WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
| EOTS Inspection | |||||
|---|---|---|---|---|---|
| Inspection Condition | (+) Probe | (-) Probe | Reference | ||
| Connector | Terminal | Connector | Terminal | ||
|
Exhaust heat recovery sensor (component side) | 1 (signal) | Exhaust heat recovery sensor (component side) | 1 (ground) | Table1 |
EXHAUST HEAT RECOVERY SENSOR RESISTANCE SPECIFICATION
| Temperature | Resistance (kΩ) | |
|---|---|---|
| °C | °F | |
| -40 | -40 | 48.14 |
| -20 | -4 | 14.13 to 16.83 |
| 0 | 32 | 5.79 |
| 20 | 68 | 2.31 to 2.59 |
| 40 | 104 | 1.15 |
| 60 | 140 | 0.59 |
| 80 | 176 | 0.32 |
| 100 | 212 | 0.19 |
| 110 | 230 | 0.145 to 0.149 |
| 120 | 248 | 0.12 |
Good
- Go to "Verification Of Repair " procedure.
No Good
- Carefully re-do this troubleshooting guide steps.
- If no problems were found with the circuits or connectors, replace the exhaust heat recovery sensor and Go to "Verification Of Repair " procedure.