DTC Information: DTC Detecting Condition
WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
Case 1 |
- Engine speed is above the target while idle speed control torque is around the minimum
- Poor connector connection
|
- Intake system for air leakage
- Binding throttle valve
- PCSV
- Throttle body
|
| Case 2 |
- Fuel cut-off during stand-still and idle condition
|
| Enable Conditions |
- Engine coolant temperature is greater than 55°C (131°F)
- IAT is greater than -10.5°C (13.1°F)
- Accelerator pedal is same as 0%
- Vehicle speed is same as 0
- Barometric pressure is greater than 74.5 kPa
|
| Threshold Value |
Case 1 |
- Difference between actual engine speed and target engine speed is greater than 200 RPM
- Difference between minimum idle torque and actual idle torque is greater than 20Nm
|
| Case 2 |
- Fuel cut-off is greater than 3 times
|
| Diagnostic Time |
|
| MIL ON Condition |
|