Component Inspection
WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
| Inspection Condition | (+) Probe | (-) Probe | Reference | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
MAPS (component side) | 1 (IAT signal) | MAPS (component side) | 2 (ground) | Table1 |
INTAKE AIR TEMPERATURE SENSOR (IATS) SPECIFICATION
| Temperature | Resistance (kΩ) | Temperature | Resistance (kΩ) | ||
|---|---|---|---|---|---|
| °C | °F | °C | °F | ||
| -40 | -40 | 38.88 to 50.77 | 60 | 140 | 0.52 to 0.65 |
| -20 | -4 | 13.20 to 16.83 | 80 | 176 | 0.28 to 0.35 |
| 0 | 32 | 5.12 to 6.12 | 100 | 212 | 0.16 to 0.21 |
| 20 | 68 | 2.20 to 2.69 | 120 | 248 | 0.10 to 0.13 |
| 25 | 77 | 1.81 to 2.21 | 130 | 266 | 0.08 to 0.10 |
| 40 | 104 | 1.02 to 1.27 | 150 | 302 | 0.05 to 0.07 |
Good
- Go to "Verification Of Repair " procedure.
No Good
- Carefully re-do this troubleshooting guide steps.
- If no problems were found with the circuits or connectors, replace the MAPS and Go to "Verification Of Repair " procedure.