DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.

Item		Detecting Condition	Possible Cause
DTC Strategy	Case 1	Stuck check, Duty	Poor connector connection Excessive motor operating current due to foreign material ingress Faulty ITM control circuit Faulty ITM
	Case 2	Target error check
	Case 3	Check the voltage
Enable Conditions	Case 1	No DTC related ITM (U063F00, P2B5800, P2B5900, P2B6000, P00B700) ITM valve position is between 0° and 225° Actual ITM valve position is less than 1.5° that it stays for 100 ms
	Case 2	ITM valve position is between 0° and 265° Actual ITM valve position is less than 1.5° that it stays for 100 ms ITM motor duty is more than 0%
	Case 3	No DTC related ITM (U063F00, P2B5800, P2B5900, P2B6000, P00B700) Active ITM
Threshold Value	Case 1	When duty is more than 40%
	Case 2	When how large of difference between target ITM position and actual ITM position is more than 8°
	Case 3	When ITM motor output voltage is higher than specified voltage
Diagnostic Time	Case 1	5s
	Case 2	20s
	Case 3	20s
MIL ON Condition		2 driving cycles